Fix it in this order

  1. Set the scale to 100%. In the print window choose Actual size, never "Fit to page". Fit to page is the usual reason labels come out tiny or off.
  2. Match the paper size. Pick your label's exact size in the print window, and in your printer's own settings. They must match the size chosen in your label app.
  3. Calibrate the printer. If labels skip, drift or print across the gap, the printer has lost track of them. Do it whenever you change the label size. Zebra's ZD421 and ZD621 guide shows how; the buttons differ by model, so check your printer's manual.
  4. Move the print a little. In SGT, under your paper, open Fine-tune this paper and use Move right and Move down, in millimetres. A minus number moves it left or up.

Sheets that drift down the page

If the first row is right and the last is wrong, the gaps are off. In Fine-tune this paper, change the top and left margins and the gaps between labels. Your sheet's packet or the maker's site lists the numbers. Test on plain paper, then hold it against a sheet.

Using Shopify? SGT is our app for this: see it on the Shopify App Store (free plan, 4.8 from 53 reviews).

Labels sideways or upside down

Some rolls feed sideways. On the Print Barcodes page, change Content direction under Label setup. The preview shows it as it will print.

The barcode won't scan

  • Bars too thin: shorten the code or use a wider label. SGT warns you when the thinnest bar is under 0.25 mm.
  • Wrong format: Code 128 takes any standard code. UPC and EAN take only valid numbers.
  • Wrong number: check the check digit.

Always use Test print for one label before printing many.

Prefer video? Watch the 90-second SGT tour on YouTube.

Frequently asked questions

Why are my labels printing so small?

Usually the print window is on Fit to page, or its paper size is bigger than your label. Choose Actual size (100%) and your label's size.

Why does my label printer skip every other label?

It usually needs calibrating for that roll, or its paper size is longer than the label. Set the size, then calibrate.

Why is only part of the label printed?

The paper size in the print window is smaller than the label, or the content is outside the printable area. Match the size, then check the margins.

Written by SingleTec, the team that builds and supports SGT, a Built for Shopify app on the Shopify App Store since 2023.